Welcome to Ram Cleaner!
+(800) 326 2644 office@ramcleaner.com

RAM diluted 2 oz. to 30 oz. water is an excellent cleaner of all plastic products, for porous and textured surfaces. Use a soft brush for problem areas.

1. Apply RAM diluted 1 oz. to 1 gallon (128 oz.), or 1/4 oz. to 1 quart (32 oz.) water with spray mist or cloth.
2
. Use clean, dry cloth to buff glass completely dry. (This mixture can also be used for windshields, bathroom mirrors, motorcycle guards, swimming masks or goggles, eye glasses, TV screens, ceiling fixtures, etc.) Cleans and protects in a single action. Helps resist 75-80% of natural hand oils of unwanted fingerprints.

RAM diluted 2 oz. to 30 oz. of water is a General All Purpose Cleaning Mixture. Spray your counter-tops, furniture, paneling, wood-work walls, upholstery, appliances, light fixtures, ceramics, stainless steel, patio and pool furniture, Venetian blinds and any metal surface. Spray mist and wipe dry.

RAM may be used full strength for tough problems such as rust, road tar, driveway cleaning, degreasing car engines, glue and soap buildup. Apply to area to be cleaned and let stand for up to five minutes, then wipe off with clean cloth. On any metal surface such as motorcy-des, house siding, autos and trucks, etc., do not use full strength in hot sun or while surface is hot, let it cool down, spray with cold water hose and then apply RAM, hose again.

RAM can be used as a mild spray solution or full strength wash. Just adjust the strength to fit your particular cleaning job. Start with the recommended dilutions, but you may find it necessary to use more or less cleaner to adjust to varying cleaning problems. For the small job, apply RAM to damp cloth or sponge and wipe. For the very tough job on hard surfaces dilute RAM 2 to 10 and use Scotch Brite scour pad as needed on barbecue grills, stoves, burners, ovens, grates, pots and pans and buildup of soap, mold and mildew on bathroom shower area.

Recreational equipment such as vans, campers, boats, RVs, tents, sleeping bags, hunting, fishing and sporting equipment can benefit from the use of RAM for exterior cleaning problems, and interior cleaning of carpets, ovens, upholstery and mildew. Great for removing tree stains, mildew, mold and dirt from portable awnings on mobile homes and semi-tractors. Great for any baked-on enamel surface.

PLEASE NOTE: Never use Ram on anything that is not washable, i.e. dry clean items. We do not recommend use of RAM on any item colored with red pigment or paint. Always test spot in an inconspicuous place.

.

NOTE: Always test for colorfastness when using RAM on carpets, upholstery, fabrics, and spot cleaning. RAM can also be used to clean carpeting, either as an individual stain spot, or can be used to do an entire room. Some of the common stains RAM can remove are: grease, wine, liquor, soda, pet stains, gum, oil, coffee, glue, paint, grape juice, candle wax, some inks, vomit, water stains and hair dye.

TO REMOVE STAINS FROM CARPETING

1. Spray a solution of 2 parts RAM to 30 parts water onto stain; let it stand for 20 seconds.
2
. Cover with towel; step on it with a twisting motion to soak up stain.
3
. Rub dry with second towel; repeat if necessary until stain is removed.

1. Take a pin or sharp instrument and punch holes in object.
2
. Dilute RAM 2 oz. to 30 oz. water. Spray on objects and let stand for two minutes to emulsify. Use nylon brush to help remove.

1. Vacuum carpet.
2
. Dilute RAM 2 parts to 10 parts water for badly soiled carpet. For regular carpet cleaning, use 1 part RAM to 15 parts water.
3
. Apply with soft bristle brush or sponge mop to loosen soil.
4
. Wipe badly soiled areas with clean towel if necessary.
5
. Vacuum.

(Machine with rotary brushes is best)

1. Vacuum carpet.
2
. Dilute RAM 2 parts to 30 parts water. Pre-spot heavily soiled areas.
3
. Add same mixture to machine. (For best results lightly spray a 12 x 12 area with garden sprayer before using machine. This gives RAM time to break up soil.)
4
. Use machine slowly – move at a slow pace

The use of hot water or “steam extraction” systems have shown considerable growth in past years. Often referred to as “steam” cleaning, this system does not actually use steam, but rather hot water under pressure. This hot water is immediately vacuumed up, bringing with it loosened and dissolved soil. RAM is excellent for this type of cleaning. Dilute RAM 2 oz to 30 oz. of water for this type of cleaning. If heavily soiled, you may want to go to a 2 oz. RAM to 15 oz. of water mixture

(Diamonds, Gold, Silver)

For the ultimate cleaning and care of fine jewelry, RAM is a must. Dilute 2 oz. RAM to 10 oz. water in a bowl or jar. Immerse jewelry for five minutes. Remove and scrub with old toothbrush. Rinse with water and buff dry with cotton cloth. The shine and sparkle will amaze you.

RAM will remove sun tan lotions and body oils from upper walls of pool interior. Dilute RAM 2 oz. to 30 oz. water, spray on sponge and rub walls. Before painting pool, RAM will remove dirt and grime from pool surface and is an excellent prepaint bonder. Dilute RAM 2 oz. to 30 oz. of water, stronger if desired. Scrub surface with brush and hose off.

Note: Always test for colorfastness when using RAM on carpets, upholstery, fabrics and spot cleaning.

1. Vacuum area to be cleaned.
2
. Dilute RAM 2 oz. to 30 oz. water.
3
. Spray mist RAM cleaner on surface, let stand for one minute and wipe or pat dry with clean cloth. Repeat as necessary.

1. Remove blinds.
2
. Hang on clothes line or lay on table or bench.
3
. Dilute RAM 2 oz. to 30 oz. water.
4
. Spray mist starting at top proceeding to bottom.
5
. Let stand for five minutes.
6
. Spray off with water hose and repeat as necessary.
7
. Let dry and hang back up.

1. Dilute RAM 2 oz. to 30 oz. water. If heavily soiled, 2 oz. RAM to 10 oz. water.
2
. Spray mist RAM over area to be cleaned. (Work in a small area.)
3
. Scrub top with brush giving RAM time to break up soil and mildew.
4
. Rinse with clean water.

To boost cleaning power of regular detergents (powder or liquid) on grass stained clothes, work clothes, diapers, grease spots or heavily soiled clothes, add 2 oz. RAM with regular load. For tough stains, dilute RAM 2 parts to 10 parts water and moisten problem area, rub in and wait a few minutes, put in laundry as usual.

1. Dilute RAM 2 oz. to 10 oz. water.
2
. Apply with cloth or sponge, working soil loose.
3
. Rinse thoroughly with pressure hose. Buff surface dry. (Do not clean metal in direct sun or when metal is hot.)

(Do not use on asphalt)

Dilute RAM 2 oz. to 30 oz. water. If heavily soiled, dilute RAM 2 oz. to 10 oz. water. Use a strong bristle brush. You may have to repeat if concrete is rough and grease has worked into rough area. Allow five to ten minutes to break up soil and hose off. Repeat if necessary. If fresh oil has absorbed into concrete it may leave a wet look although all surface oil is removed. Let dry a few days in hot sun and repeat. If concrete has totally absorbed soil, you will not be able to remove the stain.

For mobile homes, aluminum sidings, gutters, camping trailers, RV’s and semi-tractor washing.

1. Dilute RAM 2 oz. to 30 oz. water. (If oxidation, mildew, grease, oil or diesel oil is present dilute 1 oz. to 10 oz. water.)
2
. Dip sponge (sponge mop for higher areas) into solution and wipe clean.
3
. Spray mist with hose and let dry or towel buff.
You may want to spray with liquid wax after this procedure to bring to shine.

Cleans all washable floors, including no-wax floors, linoleum, vinyl, ceramic tile, and all smooth painted and unpainted surfaces.

1. Dilute RAM 2 oz. to 30 oz. water or 8 oz. per gallon in warm water.
2
. Pre-soak heavily stained area and allow five minutes to soak.
3
. Mop floor and allow to dry.

1. Dilute RAM 2 oz. to 10 oz. water.
2
. Sponge mop floor.
3
. Let stand three to four minutes.
4
. Use Scotch Brite scour pad if done by hand or strip with abrasive buffer.
5
. Mop with 2 oz. RAM to 30 oz. water and let dry.

A dirty condenser coil is a major source of compressor failure. RAM can help you avoid this costly procedure.

1. Turn power switch off.
2
. Dilute RAM 2 oz. to 10 oz. water.
3
. Use forceful spray and spray into coil, starting at top moving to bottom.
4
. Let stand five minutes.
5
. With garden hose, spray coil off.
6
. Turn power back on, BUT WAIT 30 MINUTES TO START
UNIT.

1. Dilute RAM 1 part to 5 parts water.
2
. Spray on engine or engine parts when cool.
3
. Let stand five minutes for RAM to break up grease, oil and soil.
4
. Rinse with pressure hose.

1. Heat up to 110 degrees.
2
. Dilute RAM 2 parts to 10 parts water. Apply moderately.
3
. Leave on for five minutes.
4
. Let cool and wipe thoroughly using clean damp cloth. Use Scotch Brite scour pad if needed.
5
. Repeat if necessary.